Jtag Modz, Iso Modz, Modded Lobbys & Much Much More!!!
HomeCalendarFAQSearchLog inRegisterDonate
Join Modz4Godz.net Lobbys Starting Soon
WaW 10th and 11th lobbys starting soon

Share | 

 FreeBoot v0.3

Go down 

Posts : 100
Reputation : 4
Join date : 2010-08-27
Age : 26
Location : Indiana

PostSubject: FreeBoot v0.3   Sat Aug 28, 2010 6:28 am

Download link toFreeboot v0.3

Completely replaces XBR! No dual-nand (Cygnos) needed!

libeay32.dll error? (Copy bin/libeay32.dll from the RAR into the same directory as ibuild)

It is confirmed that older original NAND dumps are supported by ibuild. 7371 is preferred, but not required!

[v0.03 - coded by ikari]

I. Introduction
freeBOOT is a rebooter for the Microsoft Xbox 360. This version of freeBOOT
allows you to reboot into kernel 2.0.9199 on all Xenon, Zephyr, Falcon, and
Jasper consoles, which are vulnerable to the JTAG hack.

This version of freeBOOT no longer requires a second flash memory and will
thus work with all currently existing solutions.

II. Bug Fixes

III. New Features
- updated to kernel 2.0.9199
- now supports all consoles and flashing solutions (ikari)
- removed memory protections

Code can be executed and modified anywhere in the range from 0x80000000
to 0x9FFFFFFF. This can be used to create game trainers and will allow
for porting of emulators, which rely on dynamic compilation.

- encrypted DevKit XEXes are now working
- includes dash launch patch
- LIVE/PIRS/GOD content fully working
- internal security breach reports deactivated (Redline99)
- easier image generation process (ikari)
- ibuild can now also generate single flash XeLL and original images (ikari)

IV. Instructions
In contrast to previous freeBOOT releases, the image generation process has
been made a lot easier. As prerequisites you will need an image of your
console updated to kernel 2.0.7371 and an archive "9199.zip" available
at the usual places.

1. Extract your original image

Extract your original 7371 image with the following command:

> ibuild.exe x -d temp\ -p <cpu> -b <1bl> .7371.bin

2. Extract "9199.zip" archive

Extract the contents of the "9199.zip" archive into the "data"

3. Copy these files from "temp" to "data" directory

- crl.bin
- crl.bin.meta
- extended.bin
- extended.bin.meta
- kv.bin
- odd.bin
- odd.bin.meta
- secdata.bin
- secdata.bin.meta
- smc_config.bin

4. Patch SMC

Put a patched "smc.bin" in the "data" directory. For Cygnos360, a
patched SMC can be created with their software. Theres also a
collection of patched SMCs available at the usual places. Make sure
to pick the right one for your console.

For other solutions, a patched SMC can be extracted from previously
released XeLL images.

5. Create the freeBOOT image

Finally, create your freeBOOT image with this command:

> ibuild.exe c freeBOOT -c <console> -d data\ -p <cpu>
-b <1bl> .bin\image.bin .bin\fuses.bin

Replace <console> with either "xenon", "zephyr", "falcon", "jasper",
"jasper256" or "jasper512".

VII. Credits
Thanks a lot to [cOz] and Bliep4Ever for providing most of the new
patches in this release. Without their support, this would not have been
possible. Greetz to unknown.

ikari, 2010/04/13
Back to top Go down

Posts : 135
Reputation : 19
Join date : 2010-09-02
Age : 23

PostSubject: Re: FreeBoot v0.3   Tue Sep 14, 2010 6:58 am

Back to top Go down
FreeBoot v0.3
Back to top 
Page 1 of 1

Permissions in this forum:You cannot reply to topics in this forum
Modz4Godz :: JTAG Related Modding-
Jump to: